Custom Lever Lifting Belt

Lever Weightlifting Belts

If you’re serious about lifting weights and want to ensure that your progress is maximized, you need to invest in a quality weightlifting belt. But which one should you get? And how do you know if it’s the right fit for you? This blog post will discuss the benefits of a custom lever lifting belt and how to measure your waist for a custom size.

What is a custom lever lifting belt?

A custom lever lifting belt is a piece of equipment designed to help you lift heavier weights and improve your performance. The benefits of using a custom weightlifting belt are vast and can include improved posture, stronger core muscles, and increased power.

How to measure your waist for a custom size?

First, measure your waist at the largest point on your torso to ensure that you get the best fit possible from your custom weightlifting belt. This will be just below your ribcage. Take note of the size in inches that you measured, as this will be the size of the belt you need to order. If you are between sizes, go with the smaller size.

Why wear a custom lever lifting belt?

There are many reasons to wear a weightlifting belt, but safety is the most important. A weightlifting belt helps to keep your spine in alignment and prevents spinal injuries. It also supports your abdominal muscles, which can help you lift more weight and avoid damage to your lower back.

Another reason to wear a weightlifting belt is to improve your performance. Wearing a belt can increase your strength and stamina by helping to stabilize your spine and abdominal muscles. It can also help you lift weight by supporting your hips and lower back.

If you’re not sure whether or not you need a weightlifting belt, here are some tips on how to measure your waist for custom size:

1- Start by taking off your clothes and lying on a flat surface.
2- Measure around the middle of your body, just above the navel (or belly button). Make sure that the measuring tape is tight against your skin but not too tight – you should be able to breathe comfortably while measuring.
3- Use the measuring tape to find your waist size in inches (or centimeters). Write this number down.
4- Next, find a weightlifting belt that fits comfortably around your waist in inches (or centimeters). You can try on different belts to find the one that works best.
5- Once you have found the weightlifting belt that fits well, write down the size (in inches or centimeters) and the corresponding number from step 1.
6- Finally, measure your waist again, but this time wear the weightlifting belt while lying down. Make sure that the measuring tape is against your skin and that it is not too tight – you should be able to breathe comfortably while measuring. Write down the new waist size in inches (or centimeters).

What are the benefits of a custom lever lifting belt?

There are several benefits to wearing a custom weightlifting belt. First and foremost, they can help you achieve your goals more effectively by ensuring you keep tension on your muscles throughout the lift. This leads to better strength, size, and tone results. Additionally, custom weightlifting belts can help reduce back pain and ensure correct alignment when performing exercises.

They also provide extra stability when lifting heavier weights, preventing injuries from happening. In addition to these benefits, custom weightlifting belts are often comfortable and stylish. As such, they can be an important part of any exercise routine. If you are interested in obtaining a custom belt for your own use or for someone else in your family, there are a few things that you should consider. First, you will need to measure your waist using a measuring or garment tape.

Next, you will need to find a belt manufacturer specializing in making weightlifting belts specifically for bodybuilders and fitness enthusiasts. Finally, compare prices and choose the best option based on your specific needs.

Video by MAC Strength & Performance

How to measure your waist for a custom weightlifting belt?

When it comes to weightlifting, you want to ensure you’re wearing the right belt. Not only can this help keep your back safe and your abdominal muscles toned, but a well-fitted belt can also help you lift heavier weights. So how do you measure your waist for a custom weightlifting belt? Here’s a guide:

1) Sit down with your feet flat on the floor arms at your sides. Bend your knees, so your thighs are parallel to the floor and measure around your waistline, keeping the tape level and as close to your body as possible.

2) Make sure the measuring tape is lying flat against your body. If it’s twisted or kinked, it’ll be inaccurate. Write down the measurement in inches.

3) If you’re between sizes, order the smaller size. Wearing a belt too tight will cause pain and inflammation in your stomach and lower back while wearing one too loose can cause discomfort and even injury.

4) Belt size is based on hips circumference (not waist circumference). Some belts have measurements in both inches and centimeters, so check which one is used in your country before ordering!

What are the best custom weightlifting belts on the market?

There are a lot of custom weightlifting belts on the market, but which are the best?

When lifting weights, you want to ensure that your body is as stable as possible. This is why it’s important to use a custom weightlifting belt. A custom belt will help stabilize your spine and pelvis while lifting weights, which will help reduce any potential spinal injury. Additionally, a custom belt will also help to improve your grip. You can lift more weight with less effort by supporting your spine and pelvis.

One of the most important factors when choosing a custom weightlifting belt is your waist size. To determine your waist size, you must measure around the middle of your torso, just above your belly button. Once you have your measurement, you can use our Belt Size Calculator to find the best fit.

If you’re looking for a quality custom weightlifting belt to help you achieve optimal performance, look no further than our website. At our shop, you can find an extensive range of custom weightlifting belts that are perfect for both beginner and experienced lifters.

Waist circumference measurement guide

There are a lot of benefits to wearing a custom weightlifting belt. Not only do they help you with your lifts, but they can also help keep your spine healthy and aligned. Below we’ll discuss how to measure your waist circumference and find your perfect size based on your body type.

How to Measure Your Waist Circumference?

To measure your waist circumference, you will need a flexible measuring tape like the ones worn by doctors. Wrap the tape around your waist at the smallest point closest to your navel. Ensure the video is tight but not too tight, and don’t pull too hard on it. The number you get from this measurement is your waist circumference in inches.

For those new to weightlifting or who want to increase their strength and performance, using a custom-made weightlifting belt can be extremely beneficial. A properly fitted strap will distribute the load evenly throughout the hips, back, and abdomen – thus helping to prevent injury while lifting weights. Furthermore, many people find that wearing a belt makes them feel more stable while lifting because it helps keep the spine in alignment. So if you want to improve your strength and performance, give a weightlifting belt a try – you may be pleasantly surprised at the results!

If you have any questions, please don’t hesitate to contact us at [email protected]. We would be happy to help!

How to measure your waist for a custom weightlifting belt?

When shopping for a weightlifting belt, it’s important to measure your waist correctly to get the perfect fit.

The following instructions will help you measure your waist:

1. Start by standing with your feet together and parallel to each other.
2. Measure around your waistline, inserting the measuring tape so that it crosses your belly button. Make sure the video is tight but comfortable against your skin.
3. When you’ve measured around your waist, divide the number by 2 to find your belt size in inches. For example, if your measurement is 36 inches, you would order a belt size of 32 inches.
4. If you are between sizes, go with the larger size.
5. Belt size is based on the hip circumference, so check the size chart to find the correct measurement in inches or centimeters for your country.

How to find the right custom lever lifting belt size?

Finding the right custom weightlifting belt size is essential for maximizing your performance. The wrong belt can not only cause discomfort but also can lead to improper form and even injury.

Here are four tips to help you find the perfect fit:

1. Measure your waist circumference. This is the most accurate way to determine your correct belt size. Take a tape measure around your waist at the belly button (or as close to it as possible). Make sure the tape is tight but not uncomfortable. Be sure to keep your arms at your sides for this measurement.

2. Compare your waist circumference measurement to the size chart your chosen weightlifting belt manufacturer provided. Most belts come in two sizes: small and large. If you fall between sizes, go with the larger size.

3. Consider how high up on your waist the belt should sit. Straps that sit lower on your hips will provide more support and help keep your back in alignment, whereas belts that sit higher on your waist will work more like a corset, squeezing your torso to push more air out of your lungs during exercises such as bench press and squatting.

4. Finally, determine what type of belt you would like. There are three types of straps: weightlifting-specific, performance, and traditional. Weightlifting-specific belts are designed to help you lift more weight and provide more support. Performance belts are made to help you hold your posture while working out, and traditional belts are typically used for conditioning or rehabilitation.

Once you have determined your waist circumference, size, and type of belt, you are ready to shop for the perfect fit!


The custom weightlifting belt is a relatively new piece of equipment that has been gaining popularity among fitness enthusiasts. This belt helps to stabilize the spine and hips, two areas where major instability can occur during heavy lifting. Not only does this help to prevent injury, but it also allows you to lift weights with more power and less risk of injury.

To find the right size for your waist, measure it at its widest point. Then use that measurement to find the corresponding belt size on our sizing chart below. Once youhave found your size, double-check the measures against the images provided so that you are confident that you have chosen the correct one.

Our belts are made from high-quality materials and come with a lifetime warranty, so there is no reason not to invest in a custom weightlifting belt!

Leave a Reply

Your email address will not be published. Required fields are marked *